Track Repair & Replacement in Orlando, FL
The track is the rail your whole door rides on, and when it's bent, worn, or packed with grit, nothing else works right. We repair, cap, or replace damaged tracks so your door rolls smooth again.
A sliding door's bottom track takes all the weight and all the abuse. Over time the metal wears down, the raised rail flattens or dents, and in Central Florida the channel fills with sand, dirt, and debris tracked in from the pool deck and patio. Once the track is damaged, even brand-new rollers won't ride smoothly, they bump over dents and grind through grit, and the door starts sticking all over again.
There are a few ways a track goes bad. Constant rolling wears a groove or flattens the rail so rollers lose their grip. A dropped or forced door can dent the track. And on older aluminum tracks, years of friction and grit can chew right through the surface. We assess how far gone it is, because the fix depends on the damage. Light wear often just needs a thorough cleaning and a stainless track cap; heavier damage calls for a full track replacement.
A track cap is one of the most cost-effective repairs we do. Instead of tearing out the frame to swap the whole track, we install a stainless-steel cap over the worn rail, giving your rollers a fresh, smooth surface to ride on. It restores a damaged track to like-new performance without the cost and disruption of a full replacement, and stainless holds up well against our humidity.
When a track is too far gone to cap, we replace it properly and reset the door so it rides true. Either way, we clean out the grit, correct the alignment, and make sure your rollers have a clean rail to run on, because a good track is what makes new rollers actually last.
What track repair covers
- Track inspection for wear, dents, and grit damage
- Deep cleaning of the track channel and weep holes
- Stainless-steel track cap over worn or grooved rails
- Full track replacement when damage is too severe
- Roller service so wheels match the repaired track
- Door reset and alignment after the repair
Other services
Frequently asked questions
What's a track cap and do I need one?
A track cap is a stainless-steel cover installed over a worn or grooved bottom rail, giving your rollers a smooth new surface without replacing the entire track. It's a durable, cost-effective fix for a track that's worn but structurally sound, and it holds up well in our humid climate.
Can a bent track be fixed without replacing it?
Sometimes. Minor dents can occasionally be worked out or capped over, but a badly bent or crushed track usually needs replacement to run true. We assess the damage and tell you honestly which repair makes sense.
Why does my track keep filling with dirt?
It's the nature of a bottom track, especially on a pool-patio or lanai door in Central Florida, where sand and grit get tracked in constantly. Regular cleaning helps, and we clear the channel and weep holes as part of any track service so water and debris drain the way they should.
Do I need new rollers if I'm fixing the track?
Often, yes. A damaged track and worn rollers usually go together, one wears out the other. We inspect both and recommend servicing them together so the repair actually lasts, rather than putting good rollers on a bad track or the reverse.
Need service today?
Call now for fast, friendly service across Orlando, FL.